Tag Archives: lined jacket

Vogue 8804 Jacket Hacked

I’ve made this jacket before. It was a LOT of work and took a LONG time! I remember as I was making it, I kept feeling like I was doing everything the hard way.

Dress and Jacket Front

I actually wanted a quick jacket to go with my pink boucle dress. When I looked into my pattern stash, this one was on top. I decided to play with the pattern pieces, making the jacket my own way, just for fun

I used pink boucle from Fabric Mart and ivory polyester satin from Fabric Wholesale Direct. I buy this poly satin in bulk for costumes and such. The ivory braid came from my stash, as did the fun buttons. In fact, if I didn’t have those fun buttons, I probably would not have made a jacket!

Dress and Jacket Back

I serged the pieces as I cut them. I started with the back, serging the back seam, then finishing the edges all around. Then I cut one half of the front, sewed the princess seam, and serge finished all the raw edges. I repeated this for the other half of the front. I cut the two side pieces and serge finished them all the way around. I sewed the side pieces to the fronts and back with the sewing machine. I repeated these assembly steps for the lining but I didn’t bother finishing those raw edges.

I faked the vent on the sleeves. I first cut off that little flap piece. I extended the length a bit, and cut two flaps of boucle and two flaps of lining. I put one boucle flap and one lining flap right sides together, and sewed along three edges, leaving open the edge that was previously attached to the sleeve. I repeated this for the other flap, turned them right side out, and ironed them flat. Then, I applied braid along the top edge, vertical edge and bottom edge but stopped halfway along the bottom. I didn’t do the other flap just yet, because I didn’t want to cut the braid.

flap

I cut the boucle sleeve pieces for one sleeve, and serged the raw edges. I positioned the flap with the braid at the spot where it belonged, where it lived before I cut it off the pattern. I basted it in place, making sure the braid stayed free of the seam. I sewed the sleeve together, on the regular machine. I turned the sleeve right side out, and laid the braid along the rest of the bottom edge of the flap, out onto the sleeve, and all the way around the hem of the sleeve. I sewed it in place, and, finally, cut the excess braid away. Now, I went back to the other flap, and repeated this whole procedure. After both sleeves were complete, I sewed the flap to the sleeve, with a decorative button on the flap.

I put the lining over the boucle right sides together, and sewed them together from one bottom front corner up, around the neck, and down to the other. I turned the jacket right side out and topstitched the braid in place.

Last step was buttons and buttonholes.

It was a fun experiment, and I like the jacket.

 

Advertisements

Leave a comment

Filed under Uncategorized